Function Transition Charts
Reading Transition Charts
The upper section is the main display and the lower section is the sub-display.
RUN Mode
Measured value (See note.) (The main display always shows the measured value.)
Present value (See note.)
Note: In FUN mode, the measured value and present value are displayed first.
The numerals shown in the above diagram are an example only. The actual display may
be different.
Present Values and Measured Values
T Mode
There is no function transition in T mode.
Measured value
Threshold value
The numerals shown in the above diagram are an example only. The actual display may
be different.
In RUN and T modes, the position of the threshold switch will determine whether the HIGH or LOW threshold
will be displayed.
Threshold switch
Main display
Sub-display
Threshold value
p. 77
BASIC OPERATION
Output value
p. 119
Section 3
ZX-T
47
Operation Manual