Omron ZX-T Operation Manual page 85

Section 5
DETAILED SETTINGS
This section describes how to set the output range, using an example of current output
with a range with the following conversions: − 0.5 mm to 16 mA and 0.5 mm to 8 mA.
Change the values in the example to suit the voltage output as required.
Output current (mA)
1.
Turn OFF the power supply to the Amplifier Unit.
2.
Move the current/voltage switch to current out-
put. The switch is found on the bottom of the
Amplifier Unit.
A voltage output is the default setting.
Moving to FUN and SPCL
3.
Turn ON the power supply and move the
mode switch to FUN.
4.
Use the LEFT and RIGHT Keys to display
SPCL on the main display.
Moving to FOCUS
5.
Press the UP or DOWN Key.
The sub-display will flash.
6.
Use the Up and DOWN Keys to display SET
or ALL.
7.
Press the ENT Key.
ZX-T
82
Operation Manual
20
4
Measured
−0.5
0.5
value (mm)
Output current (mA)
16
8
−0.5
0.5
SUB
Measured
value (mm)
Voltage output
Current output
POWER ZERO ENABLE
(mm)