Self trigger hys-
teresis width
p. 71
Note 2: Displayed only when SP-H or
SB-H is selected for the hold
condition.
When <l%se is selected, the special functions will not
be displayed and the display will return to 1nU
Monitor focus
p. 81
ECO mode
p. 105
Clamp value
setting
2-sensor
Display during
operation (See note 3.)
zero reset
p. 92
Span adjustment
p. 107
Display reverse
p. 103
Settings for non-
measurement
p. 88
Settings
initialization
Note 3: When multiple Amplifier Units are con-
nected, 2-sensor operation is displayed
on all but the CH1 Amplifier Unit.
p. 90
Section 3
BASIC OPERATION
p. 109
This symbol indicates that
after the ENT Key has been
pressed to confirm the se-
lection, the LEFT and
RIGHT Keys should be
pressed to move through
the menu.
Operation Manual
ZX-T
49