Table of Contents
Advertisement
VERIFY Function
This function compares the constants stored in the Digital Operator with
the constant in the Inverter. Verification is possible only for the Invert-
ers with same product series, power supply specifications, and control
mode (V/f control or vector control).
When the constants stored in the Digital Operator are the same as those
in the Inverter, vFy will flash, and then End will be displayed.
When the constants are not the same, the unmatched constant number
will be displayed.
Constants added with software version upgrades will be displayed when
VERIFY is performed for V7 IP65 Inverters without the additional con-
stants and V7 IP65 Inverters with the additional constants.
168
Advertisement
Table of Contents
