Omron V600 User Manual page 49

Command code Command name
uw EXPANSION
BATCH BUTTON
AUTO WRITE
CW CALCULATION
WRITE
FL FILL
fl EXPANSION
BATCH
FILL
MDC/K DATA CHECK
MDS OVERWRITE
COUNT CONTROL
•Communications Subcommands
These commands are used to cancel command execution.
Command code Command name
AA COMMAND PRO-
CESSING TERMI-
NATE
•Host Commands
These commands are used to test communications between the Hand-held Reader Writer and host
device.
Command code Command name
TS TEST
VS VERSION READ
•Controller Control Commands
These commands are used to reset the Controller or set serial communications.
Command code Command name
XZ ABORT
TR COMMUNICA-
TIONS CONDI-
TIONS SETTING
FN BASIC FUNC-
TIONS SETTING
UL SET INFORMA-
TION READ
Function
Writes up to 2 Kbytes of data to the Data Carrier in a batch when the
Data Carrier enters the communications area after the activate switch
is pressed.
Writes the calculation results for the memory data to the Data Carrier.
Writes data for the specified number of write bytes beginning from the
write start address specified in the command.
Writes data for the specified number of write bytes beginning from the
write start address specified in the command. Up to 2 Kbytes of data
can be written in a batch.
Calculates or compares memory check codes in the Data Carrier.
Controls the number of overwrites for EEPROM Data Carriers.
Function
Forcedly ends communications with the Data Carrier.
Function
Confirms the communications status between the Hand-held Reader
Writer and host device. The data sent from the host device is returned
as is.
Reads the Hand-held Reader Writer's model information, software ver-
sion and software creation date.
Function
Resets the Controller.
Sets communications parameters for communications with the host
device.
Sets the Specify Auto Command OFF function and Specify Normal
Operation Output function.
Reads the settings data for the Hand-held Reader Writer.
Section 3
Commands
Page
p.81
p.82
p.83
p.85
p.86
p.87
Page
p.88
Page
p.89
p.89
Page
p.90
p.91
p.92
p.93
RFID System
47
User's Manual