Names And Functions Of Components - Omron V600 User Manual

Names and Functions of Components

V600-CHUD
Antenna
Operation indicator (LED)
Activate switch
Interface connector
•Operation Indicator (LED)
Display
A command has been received from the host device.
Communications with the Data Carrier have completed normally.
The execution result of the noise detection command (NS) is "A" (low
noise).
Lit green
The result of the error noise detection command (EN) is "0" (normal).
When the power is turned ON, after initialization of the Hand-held
Reader Writer is completed
Communications with the Data Carrier are in progress.
Flashing green
A communications error with the Data Carrier has occurred.
A CPU error has occurred.
Lit red
A Data Carrier non-existent error has occurred.
A communications error with the host device has occurred.
The execution result of the noise detection command (NS) is "B" (high
noise).
Flashing red
The result of the error noise detection command (EN) is "1" (error).
After the operation indicator is lit or flashing for a certain time, it will turn OFF.
•Activate Switch
When button commands (button commands, button auto commands) are
used and the activate switch is pressed, communications with the Data
Carrier will commence. (For details on button commands, refer to Section
3 Commands.)
•Interface Connector
This is a USB interface with an A-series plug based on USB 1.1.
•Antenna
To communicate with the Data Carrier, move the antenna head closer to
it.
Section 1
Product Overview
Meaning
RFID System
User's Manual
11