Section 1
Product Overview
V600-CH1D-V2
RFID System
16
User's Manual
Connect the V600-CHUD to the host device.
When connecting for the first time, the USB driver must be installed.
p.18 p.19
Set the communications parameters between the host device and
Hand-held Reader Writer.
p. 32
Perform the communications test between the host device and
Hand-held Reader Writer.
p.38
Perform the communications test between the Data Carrier
and Hand-held Reader Writer.
p.38
Check the ambient environment.
p.116
Operate the system using real commands.
p.39