Omron V600 User Manual page 119

Communications Specifications
•Host Communications Interface Specifications
V600-CHUD
Item
Connectors (connector
connection status)
USB specifications
Baud rate
Device class
Vendor ID
Product ID
Use the host communications interface as the COM port for the host device.
V600-CH1D-V2
Item
Connector
Standard compliance
Transmission line
connection
Communications
method
Synchronization
method
Baud rate
Transmission code
Communications
control
Error detection
Note 1: For conversion to a 25-pin connector, use the SGC-X9P/25P-2 manufactured by Sunhayato, or
an equivalent.
Note 2: Set by a settings command.
Series A plug
Ver 1.1
Full speed (12 Mbps)
COM class
Hexadecimal format [0590]
Hexadecimal format [0048]
D-Sub 9-pin (applicable to IBM PC/AT or compatible) (See note 1.)
RS-232C
1:1
Two-wire, half duplex
Asynchronous (stop bit: 1 or 2) (See note 2.)
2,400, 4,800, 9,600, 19,200, 38,400 bps (See note 2.)
7-unit ASCII or 8-unit JIS (See note 2.)
1:1
Vertical parity (even/odd/none) (See note 2.)
Specification
Specification
Section 6
Appendices
RFID System
117
User's Manual