Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 100

Types of Screens, Common Dialog Box Settings and Operations
Reference: S There may be differences in element display order and details in display be-
Displaying element information (Show Tag)
84
tween the Support Tool and a PT. Therefore, results of tiling may be different in
the display obtained at a PT and that confirmed by the Support Tool.
S When a filter function is used for a fixed display, Full Tiling will be automatically
cancelled (confirmation message will be displayed) since the tiled status may
not be displayed correctly if the object used as a border is hidden by a filter
function.
The Support Tool can display the following element information on the screen at
the same time.
Information Displayed
on the Screen
PC (PLC) address
Description
PC (PLC) bit addresses of lamp settings (light
function) for lamps, PC (PLC) addresses of lamp
settings for touch switches, or PC (PLC) address-
es of notification (notify) bits are displayed.
For a touch switch with the notification bit function,
both PC (PLC) address of the notification (notify)
bit and lamp setting are displayed (upper: notify
bit, lower: lamp bit), and for touch switches with
other functions, the PC (PLC) addresses of lamp
settings (light function) are displayed.
The first character represents the type of element
as shown below. (In case of touch switch, the first
character for lamp bit is also represented by a T.)
L: Lamp
T: Touch switch
The second character represents the area type of
PC (PLC) addresses.
Example (PLC Vendor: OMRON)
Blank: CIO area
H: HR area
A: SR area
L: LR area
D: DM (Data Memory) area
E: EM Current Bank
For characters that indicates area type of Mitsu-
bishi, refer to page 131.
Section 5-1