Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 511

NT Transfer Utility
(4) Input "a:\setup" in the input field in the specified window.
For the drive, specify the drive containing the CD-ROM. For example, if the
CD-ROM is in drive E, enter "e:\setup". To use a floppy disk, click the
and specify the SETUP.EXE file that was copied from the NT
Transfer Utility folder to the floppy disk.
(5) Click on .
The installation started.
(6) When the setup screen of the NT Transfer Utility is displayed, click on
.
The screen for specifying the destination of program installation is dis-
played.
(7) Specify the directory for installation.
In the initial state, the directory shown below is set as the destination directo-
ry.
C: \Program Files\Omron\Ntst4.8E\Transfer Utility
If you want to change the directory, click on
directory. (If a directory that does not exist in the hard disk is specified, the
directory is automatically made.)
After specifying the destination, click on
The screen for specifying the destination for registering the start menu is dis-
played.
Appendix C
and input the drive and
.
495