Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 349

Image Editor
Cutting/copying/deleting graphics
Reference: Image data that is cut or copied on one image editor window can be pasted onto
To modify the graphic, select [Edit] (menu bar)
desired modification method.
Flip Horizontal Flip Vertical
You can cut, copy, paste, and delete the created graphic.
Cut, copy and delete operations are valid for the graphic in the range specifying
frame.
To call the desired operation, select [Edit] in the menu bar, then specify [Cut],
[Copy], [Paste], or [Delete]. (or right click the mouse, then specify [Cut], [Copy],
or [Paste])
the other image editor window (The data can be pasted until another data is
stored to the clipboard).
[Rotate or Flip], then specify the
Rotate Left Rotate Right
Cuts the graphic in the range specifying
frame and stores it in the clip board.
Copies the graphic in the range specifying
frame onto the clip board.
Pastes the graphic in the clip board to the
specified position.
Deletes the graphic in the range specifying
frame.
Section 8-1
333