Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 372

Example Screen Configuration
Alarm Screen
356
When you touch this button, the screen switches to the Monitor Screen (screen
No. 2).
S Alarm
This is a screen switching button.
When you touch this button, the screen switches to the Alarm Screen (screen
No. 4).
S Alarm list and contents
Allocate 0002000 to 0002007 in the PC (PLC) as alarm bits.
If any of the allocated bits goes ON, the corresponding alarm message is dis-
played.
When you touch the alarm message, the corrective action and details of the
alarm are displayed in the alarm content display area.
Bits Alarm Message
0002000 Line 1 Error
0002001 Line 2 Error
0002002 A-spot Screw Error
0002003 B-spot Screw Error
0002004 Low Pressure
0002005 Area 1 Alarm
0002006 Area 2 Alarm
0002007 PC (PLC) Network
Error
S Menu
This is a screen switching button.
When you touch this button, the screen switches to the Menu Screen (screen
No. 1).
S Monitor
This is a screen switching button.
When you touch this button, the screen switches to the Monitor Screen (screen
No. 2).
Section
Alarm Content Display
Set line 1.
Set line 2.
Check torque screw.
Check torque screw.
Check pipe and valve.
Detection near entry. Confirm safety
before restarting the line.
Detection near entry. Confirm safety
before restarting the line.
Check the PC (PLC) and the net-
work.
9-1