Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 184

Alarm
Note
Operation procedure
Related elements and settings
Terminology
Display line
Property setting
168
message with the date/time of the occurrence. The recorded information is
displayed when the alarm history element is displayed.
(2) If the operator touches the displayed alarm message, the specified image/li-
brary data is displayed.
The bit memory table entries to be checked are determined according to the set-
tings made at the individual bit memory table entries.
Selection using the menu bar:
Selection using the drawing toolbar:
Bit memory table:
Message
Length
Background
General
Position: Indicates the display position of the alarm history.
(The attribute point is at the upper left corner of the alarm history)
Size: Indicates the size of the alarm history.
Message
Length: Specify the number of characters of a message to be displayed.
Max. 32 characters:
Max. 39 characters:
Max. 40 characters:
With these models above, the number of characters to be displayed will be less
than these values according to the display method and if the history informa-
tion is displayed.
Max. 40 characters:
[Objects]
[Tools]
(Refer to 7-4 Bit Memory Table.)
Frame
Background
Page scroll touch switch
Line scroll touch switch
NT21
NT30, NT30C, NT31, and NT31C
NT631 and NT631C to which a system program ver-
sion lower than Ver.2.1 is installed
NT620S, NT620C, NT625C, NT631 (System Ver.2.1),
and NT631C (System Ver.2.1)
Section
[Alarm] [History]
[Table] Bit Memory
Image/
library data
Foreground
6-3