Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 227

Touch Switches
Print screen function touch switch
PRINT
Operation procedure
Terminology
Property setting
(1) When a touch switch is pressed, a hard copy of the screen is
output to a printer.
Printing screen
hard copy
Selection using the menu bar:
Selection using the drawing toolbar:
General
Position: Indicates the display position of a touch switch frame (the area that
senses pressing of the switch.)
(The reference point is at the upper left corner of the touch switch
frame)
Size: Indicates the size of a touch switch frame.
Frame: Specify whether or not a frame is displayed for a touch switch.
Shape: Specify the shape of a touch switch.
Standard, Shadow, 3-Dimension, Rectangle, Circle, Polygon, Sec-
tor
Show ON State: Specify the status when touch switch is pressed. When this
Color
Frame:
ON:
OFF:
[Objects]
Label
Frame
Color – ON, OFF
check box is ticked, touch switch will be lighten. (Not valid for
3-Dimension)
Specify the color of a touch switch if [Frame] is selected.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the display color of a touch switch which is ON.
(Can only be set for PTs with color display.)
(Setting is valid only when [Show ON state] is selected.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the display color of a touch switch that is OFF.
(Can only be set for PTs with color display.)
Transparent, white, black, blue, red, magenta, green, cyan,
yellow
Section 6-8
[Touch Switch]
211