Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 334

Recipe Table
Note
Parameter Setting Table
318
Edit
Permits clear, copy and paste operations on a selected range of record entries.
An edit popup menu with these 4 options will appear, like the menu in the current
numeral table entry.
Clear, Copy, Paste is only enabled when the clipboard contains record data.
Goto Entry
Allows the selection of an entry by specifying the entry number through a Go to
dialog. The behavior is same as the numeral table Go to dialog.
Insert Mark
Inserts a mark object in a record or a parameter name.
Import
Import parameter data from a CSV formatted file. A file open dialog with a CSV
Formatted Recipe Data (*.csv) filter will prompt for the source file.
Export
Export all data of this recipe entry. A file save dialog with a CSV Formatted Rec-
ipe Data (*.csv) filter will prompt for the target file name. Exporting a selection of
parameter data is not supported.
Reset Width
Resets the width of each column to the default setting.
The parameter data cell will always be displayed using the parameter's number
format. A decimal type parameter will display values in decimal, while a hexade-
cimal type parameter will display values in hexadecimal.
This dialog permits users to specify the setting for all parameters of a recipe table
entry.
When the Words field is changed from 2 to 1, you will be prompted with a mes-
sage that some data will be lost with this conversion. If the value is less than
Section 7-10