Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 206

Data Input
Note
Operation procedure
Terminology
Property setting
190
If thumbwheel switches are used to input numeric data, the input data is directly
written to a numeral memory table entry without being set in a data input field.
Selection using the menu bar:
Selection using the drawing toolbar:
Frame: Foreground
Frame: Background
Sign digit
General
Position: Indicates the display position of the thumbwheel switch.
(The attribute point is at the upper left corner of the thumbwheel
switch.)
Size: Specify the size of the thumbwheel switch.
Small, Medium, Large
Attribute: Specify the display attribute (attributes displayed depend on the
PT model.) Standard, Inverse, Flash, Inverse Flash
End Plate: Specify whether or not end plates are displayed at the ends of the
thumbwheel switch.
Thumbwheel Color
Frame:
Foreground:
Background:
Character Color
Foreground:
[Objects]
[Thumbwheel Switch]
Character Color: Foreground
Decimal
Integer
Input digits of maximum limit
Specify the color of thumbwheel switch frame.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the foreground color of the thumbwheel switch.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the background color of the thumbwheel switch.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the foreground color of the numeric value displayed in
the thumbwheel switch.
Section
[Data Input]
Character Color: Background
End plate
6-4