Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 354

Library Editor
Reference: When two Support Tools are started up by [Import Component] from the [File]
Reference: S When two Support Tools are started up by [Import Component] from the [File]
338
menu, the data that is cut or copied on the library table of one Support Tool can be
pasted onto the library table of another Support Tool (PT model setting of the two
screen data files should be the same). For details, refer to 3-3-6 Importing Com-
ponents from Different Screen Data File (Starting Up the Second Support Tool).
(1) Select [Library Editor] from the [Tools] menu.
The library table is displayed.
(2) Select the code of the library data to be cut or copied.
Select only one code. When two or more codes are selected, cut/copy op-
eration can not be performed.
(3) Click the
(4) Select [Cut] or [Copy].
Library data of the selected code will be stored to the clipboard. In case of
[cut], confirmation dialog box will be displayed. After clicking on
ton, cut code will be deleted from the library table.
S Pasting the library data
To paste a library data that is stored in the clipboard by cut or copy operation,
follow the procedure below.
menu, the data that is cut or copied on the library table of one Support Tool can
be pasted onto the library table of another Support Tool (PT model setting of the
two screen data files should be the same). For details, refer to 3-3-6 Importing
Components from Different Screen Data File (Starting Up the Second Support
Tool).
S If the paste operation is performed, the library data previously registered to the
code is overwritten and lost. (Confirmation dialog box will be displayed.)
S When a library data is pasted, the property (size, colors, compression, com-
ment) of the library code is changed to that of the new one.
(1) Select [Library Editor] from the [Tools] menu.
The library table is displayed.
(2) Select the code of the library data to be pasted.
Select only one code. When two or more codes are selected, paste opera-
tion can not be performed.
(3) Click the
(4) Select [Paste].
[Paste] can not be selected if the library data to be pasted is not stored in the
Button or right-click on the selected code.
Button or right-click on the selected code.
Section 8-2
but-