Mathematical Table; Description Of F-Key Input Notify Table; Operation Procedure; Supported Objects - Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Mathematical Table

7-8-2 Description of F-Key Input Notify Table

7-9

Mathematical Table

7-9-1 Operation Procedure

7-9-2 Supported Objects

308
Table Entry Number
The table entry number field, or the <No.> column is not editable. All table entries
are listed in ascending order of their entry numbers, starting from zero to one less
than the maximum number of entries.
Table Entry No.
0
1
2
3
PLC Bit Address
Specify the PC (PLC) bit that you want to link with the Function Key.
I/O Comment
Specify a comment for a PC (PLC) address or bit.
A comment can comprise up to 16 characters.
Mathematical table is only available for the NT21, NT31/631-V2 and above. The
table may contain 0 to 255 entries and each entry can be assigned a mathemati-
cal formula. The result of each calculation can be stored in either a Numeral
Table entry or a PLC address.
The mathematical table setting dialog box is displayed by following either of the
operations described below.
S Select [Tools] (menu bar) –> [Mathematical Table].
S Double click on "Mathematical Table" from application manager window
The following objects are affected or have an effect on the Mathematical Table:
Numeral Display, Numeral Input, Thumb wheel switch, Bar Graph, Analogue me-
ter, Broken Line Graph, Trend Graph.
Section 7-9
F-Key Input
F1
F2
F3
F4