Remote I/O Delay Time - Omron E5ZE-8 Communications Manual

Remote I/O Delay Time

3-6

Remote I/O Delay Time

• The time required for the remote I/O data reflecting the changed data to be
prepared at the E5ZE after a main input to the E5ZE has changed is called
the input delay time.
• The time required for the data that has been transmitted to the E5ZE using
DeviceNet communications to affect in the operation of the E5ZE is called
the output delay time.
• The maximum input and output delay times are 500 ms.
• For details on how to calculate the I/O delay time, refer to the DeviceNet
(CompoBus/D) Operation Manual (Cat. No. W267).
Section 3-6
15