Fuzzy Scale 2 Write: Wl - Omron E5ZE-8 Communications Manual

Fuzzy Scale 2 Write: Wl

Response
Unit
@
x16
1
Communications Example
Command
Response
7-5

Fuzzy Scale 2 Write: Wl

Function
Setting Data Range
R k End code
x16 x16
0
Header code
1. The response block for Fuzzy Scale 1 Read (Rk) does not include read
data if the end code of the response block is other than 00.
2. Refer to 2-4 End Codes .
In this example, the E5ZE is operated with Fuzzy Scale 1 Read (Rk) under the
following conditions.
Unit no.:
Memory bank no.: 2
Control point:
Fuzzy scale 1:
@ 0
@ 0
This command is used to write fuzzy scale 2 values to a control point for the
E5ZE to determine the speeds of temperature changes due to external distur-
bance.
1. Fuzzy Scale 2 Write (Wl) cannot be used at a control point being auto -
tuned.
2. Fuzzy scale 2 values for a control point being auto - tuned will be set auto-
matically when the auto - tuning of the control point finishes.
3. The fuzzy scale 2 value of a control point will be automatically adjusted ac-
cording to the PID constants. The fuzzy scale 2 value can be changed
manually after PID constants are set for the bank.
Setting unit
C or F
Default
Setting data
Read data
Fuzzy scale 1
x16 x10 2 x10 1
1 0
1
3
40.0 C
1 R k 2 3
1 R k 0 0
Normal end
0.01
C/s
9999
0020 to 9999
FCS
x10 x10 -1
0
Decimal point
0 0 7 9
0 4 0 0
40.0 ° C
F/s
Section 7-5
*
s
Terminator
*
s
*
s
7 C
159