Data Link Indicators; Data Link Settings; Rotary Switches - Omron CS1W-SLK11-21 - 06-2004 Manual

Data Link Indicators

Status Area Words
4-3

Data Link Indicators

4-4

Data Link Settings

4-4-1

Rotary Switches

44
Unit No.
0
1
2
3
4
5
6
7
The data link status can be checked using an indicator on the SYSMAC LINK
Unit.
CS1W-SLK11
Name Condition
LNK Lit
Flashing
Rapid flashing
Not lit
Note Refer to Setup and Activation in 4-10 Data Link Precautions for details.
The following settings are required to run data links.
Set the node address using the rotary switches on the front of the Unit. Refer
to 3-3 Setting Node Address for details on setting the rotary switches.
Words
CIO 1508 to CIO 1523
CIO 1533 to CIO 1548
CIO 1558 to CIO 1573
CIO 1583 to CIO 1598
CIO 1608 to CIO 1623
CIO 1633 to CIO 1648
CIO 1658 to CIO 1673
CIO 1683 to CIO 1698
Data links are operating normally.
Data links are not active due to data link table error.
Data link table communications cycle time is too short.
Data links are not active.
Section 4-3
Unit No. Words
8 CIO 1708 to CIO 1723
9 CIO 1733 to CIO 1748
10 CIO 1758 to CIO 1773
11 CIO 1783 to CIO 1798
12 CIO 1808 to CIO 1823
13 CIO 1833 to CIO 1848
14 CIO 1858 to CIO 1873
15 CIO 1883 to CIO 1898
CS1W-SLK21
Meaning