Omron CS1W-SLK11-21 - 06-2004 Manual page 44

Cable Connections
Optical Fiber Cable
Accessories
Optical Fiber Cable Connections
Specifications
Optical Fiber Cable Connectors:
S3200-COCF2011
S3200-COCF2511
Optical Fiber Cable Connectors:
S3200-COCF2511
S3200-COCF2511
Note (1) The cables listed above are black and have power supply lines and ten-
sion members, although the power supply lines aren't used in the SYS-
MAC LINK Network.
(2) All of the cables listed above are attached to the connectors with adhe-
sive.
(3) Special training is required to assemble Optical Fiber Cables and connec-
tors with adhesive.
Use the following accessories to assemble and test Optical Fiber Cables.
Name
Optical Fiber
Assembly Tool
Optical Power Tester
Master Fiber Set
Note Use the CAK-0057 (made by Sumitomo Electric Industries, Ltd.) to assemble
the S3200-COCF2071/2571 Connectors. (Production of the S3200-CAK1062
Assembly Tool has been stopped.) The S3200-COCF2071/2571 Connectors
can be assembled using the S3200-CAK1062 by adding the JRFK-57PLUS
(made by Sumitomo Electric Industries, Ltd.).
This manual does not provide details on Optical Fiber Cable preparation. For
details, refer to the instructions provided with the CAK-0057 or S3200-
CAK1062 Assembly Tool.
All of the nodes in an Optical SYSMAC LINK Network are connected in a line
(daisy-chain configuration) with H-PCF Optical Fiber Cable.
The nodes can be connected in any order, but be sure to begin with the upper
connector (SL1) of the highest node in the network and connect to the lower
connector (SL2) in the next lower node, as shown in the following diagram.
Length
2 m
5 m
ß
10 m
15 m
20 m
Over 20 m
2 m
5 m
ß
10 m
15 m
20 m
Over 20 m
Model
CAK-0057
(See note.)
S3200-CAT2700
S3200-CAT2001H
Section 2-4
Model
S3200-CN201-20-25
S3200-CN501-20-25
S3200-CN102-20-25
S3200-CN152-20-25
S3200-CN202-20-25
S3200-CN-20-25
(Specify length (m) when ordering.)
S3200-CN201-25-25
S3200-CN501-25-25
S3200-CN102-25-25
S3200-CN152-25-25
S3200-CN202-25-25
S3200-CN-25-25
(Specify length (m) when ordering.)
Specifications
Crimp-cut tool for the
S3200-COCF2071/2571 Connectors
With S3200-CAT2702 Head Unit and
adapter for the S3200-COCF2071/
2571 and S3200-COCF2011/2511
Connectors
One meter cable for use with the
S3200-CAT2702 Head Unit
27