Omron CS1W-SLK11-21 - 06-2004 Manual page 71

Data Link Table Example
Example of Node 2 Settings
Node 2 Table
Note
Setting Tables for Other Nodes
Node 5 Table
54
Item
Node address
Common link Number of words in
parameters CIO Area
Number of words in
DM Area
Refresh param- PLC type
eters
Start word
Refresh nodes
When setting data link tables for CS-series SYSMAC LINK Units with CX-Pro-
grammer Ver. 1.2 (Service Pack 1), set the PLC type to CV/CVM1. With CX-
Programmer Ver. 2.0 or later, it is possible to set a CS-series PLC type.
Item
Node address
Common link Number of words in
parameters CIO Area
Number of words in
DM Area
Local node address: 2
CIO Area local node send size: 10 words
DM Area local node send size: 10 words
Select "CV/CVM1"
CIO CIO Area local node data link start address:
CIO 1000
DM DM Area local node data link start address:
D00000
Node refresh order: 2, 5, 6, 8
Node addresses are listed in order with the
starting node address first. Because here
the local node is listed first, node 2 will first
send data and then received data in order
from nodes 5, 6, and 8.
Local node address: 5
CIO Area local node send size: 15 words
DM Area local node send size: 10 words
Section 4-7
Setting
Setting