Remote Programming And Monitoring - Omron CS1W-SLK11-21 - 06-2004 Manual

Remote Programming and Monitoring

7-1 Remote Programming and Monitoring
7-1-1 Local Networks
CX-Programmer
Note Remote programming and monitoring are possible from a computer using the
7-1-2 Remote SYSMAC LINK Networks
CX-Programmer
CX-Programmer
124
A remote PLC can be programmed and monitored across a network from a
Programming Device connected to a PLC.
A CX-Programmer connected to a CS-series, CVM1, CV-series, or C200HX/
HG/HE CPU Unit can program and monitor a CPU Unit on the same network.
Programming and monitoring are possible, including CPU Units that are differ-
ent from the one to which the Programming Device is connected.
Programming Device
CS-series, C200HX/HG/HE,
CVM1, or CV-series PLC
CX-Programmer as a node.
A CX-Programmer connected to a CS-series, C200HX/HG/HE, or CV-series
CPU Unit can program and monitor any other PLC on another SYSMAC LINK
Network. Other types of PLC, different from the one to which the CX-Program-
mer is connected can also be programmed or monitored on remote networks.
Programming Device
SYSMAC LINK Network
CS-series, C200HX/HG/HE,
or CV-series PLC
SYSMAC LINK Network SYSMAC LINK Network
Note Remote programming and monitoring are possible from a computer using the
CX-Programmer as a node. With the C200H-SLK21 and C1000H-SLK21,
however, remote programming and monitoring are not possible with the CX-
Programmer. Refer to 9-3 Using the C200H-SLK21 or C1000H-SLK21 for
details.
SYSMAC LINK Network
CS-series, C200HX/HG/HE,
CVM1, or CV-series PLC
SYSMAC LINK Network
CS-series PLC
SYSMAC LINK Network
CV-series PLC
CS-series PLC
CS-series,
CVM1, or CV-
series PLC
Section 7-1
Programming
and monitoring
Programming
and monitoring
Programming
and monitoring
CS-series, CVM1,
CV-series, or
C200HX/HG/HE PLC