This chapter explains the Diagnostic screen.
24.1 Diagnostic
Click Management, Diagnostic in the navigation panel to open this screen. Use this screen to
check system logs, ping IP addresses or perform port tests.
Figure 96 Diagnostic
The following table describes the labels in this screen.
Table 60 Diagnostic
LABEL
System Log
IP Ping
Ethernet Port Test
Chapter 24 Diagnostic
C
DESCRIPTION
Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
Type the IP address of a device that you want to ping in order to test a
connection.
Click Ping to have the switch ping the IP address (in the field to the left).
Type a port number and click Port Test to perform internal loopback test.
ES-2108 Series User's Guide
H A P T E R
Diagnostic
2 4
165