Table 74 Command Summary: Configuration Mode (continued)
COMMAND
ssh
https
multi-login
cluster
cluster member
mvr
syslog
pwr interface
<port-list>
pwr mibtrap
vlan
<1-4094>
vlan-type
<802.1q|port-
based>
igmp-
snooping
8021p-priority
<0-7>
host-timeout
Chapter 30 Introducing Commands
DESCRIPTION
Disables the secure shell
key
server encryption key. Your
<rsa1|rsa|dsa>
switch supports SSH versions
1 and 2 using RSA and DSA
authentication.
Removes all remote hosts.
known-hosts
known-hosts
Removes the specified remote
host from the list of all known
<host-ip>
hosts.
Removes remote known hosts
known-hosts
with the specified public key
<host-ip>
(1024-bit RSA1, RSA or DSA).
[1024|ssh-
rsa|ssh-dsa]
Resets the session timeout to
timeout
the default of 300 seconds.
Disables another administrator
from logging into Telnet.
Disables cluster management
on the switch.
Removes the cluster member. 13
<mac-address>
Disables MVR on the switch.
<vlan-id>
Disables syslog logging.
Disables syslog logging to the
server <ip-
specified syslog server.
address>
Enables syslog logging to the
server <ip-
specified syslog server.
address>
inactive
DIsables syslog logging for the
type [type]
specified log type (
link
report
Disable PoE on the specified
ports. (ES-2108PWR only)
Disables mibtraps. (ES-
2108PWR only)
Enters the VLAN configuration
mode. See
page 209
Specifies the VLAN type.
Enables IGMP snooping.
Sets the IEEE 802.1p priority
values for IGMP control traffic.
Sets the host timeout value.
<1-16711450>
ES-2108 Series User's Guide
sys
,
,
config
,
error
or
).
Section 30.11.5 on
for more information.
PRIVILEG
E
13
13
13
13
13
14
13
13
13
13
13
13
13
13
13
13
13
13
199