ZyXEL Communications Dimension ES-2108 User Manual page 208

ES-2108 Series User's Guide
Table 75 interface port-channel Commands (continued)
COMMAND
speed-duplex
no
inactive
help
exit
intrusion-lock
test
208
DESCRIPTION
Sets the duplex mode (
<auto|10-
and speed (
half|10-
the connection on the interface. Selecting
full|100-
auto
half|100-
able to negotiate with a peer
full|1000-
automatically to obtain the connection
full>
speed and duplex mode that both ends
support.
Disables the outgoing traffic port list for a
egress set
port-based VLAN.
<port-list>
Disables IGMP immediate leave on the
igmp-
port.
immediate-
leave
igmp- Disables IGMP filtering on the port.
filtering
profile
Disables IGMP group limitation.
igmp-group-
limited
Disable GVRP on the port(s).
gvrp
Disables flow control on the port(s).
flow-control
Disables VLAN trunking on the port(s).
vlan-trunking
Disables port mirroring on the port(s).
mirror
Disables DiffServ on the switch.
diffserv
Disables bandwidth limit on the port(s).
bandwidth-
limit
Disables broadcast storm limits on the
bmstorm-limit
switch.
Enables the port(s) on the switch.
inactive
Disables intrusion-lock on a port so that a
intrusion-
port can be connected again after you
lock
disconnected the cable.
Disables the specified port(s) on the
switch.
Displays a description of the interface
port-channel commands.
Exits from the interface port-channel
command mode.
Enables intrusion lock on a port and a
port cannot be connected again after you
disconnected the cable.
Performs an interface loopback test.
half full
or
10 , 100 or 1000 Mbps) of
(auto-negotiation) makes one port
Chapter 30 Introducing Commands
PRIVILEGE
) 13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13