Table 54 SNMP Commands
COMMAND
Set
Trap
23.3.1 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• Private MIBs
23.3.2 SNMP Traps
The switch sends traps to an SNMP manager when an event occurs. SNMP traps supported are
outlined in the following table.
Table 55 SNMP Traps
OBJECT LABEL
SNMPv2 Traps
Cold Start
WarmStart
linkDown
linkUp
authenticationFailure
RFC 1493 Traps
newRoot
topology change
23.3.3 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Chapter 23 Access Control
DESCRIPTION
Allows the manager to set values for object variables within an agent.
Used by the agent to inform the manager of some events.
OBJECT ID
1.3.6.1.6.3.1.1.5.1 This trap is sent when the switch is turned on.
1.3.6.1.6.3.1.1.5.2 This trap is sent when the switch restarts.
1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from
1.3.6.1.2.1.17.0.1 This trap is sent when the STP topology changes.
1.3.6.1.2.1.17.0.2 This trap is sent when the STP root switch changes.
ES-2108 Series User's Guide
DESCRIPTION
non-authenticated hosts.
153