About This Guide
Document Purpose and Intended Audience
Document Summary
7976-A2-GB20-10
This guide contains information needed to set up, configure, and operate the
Hotwire Model 7976 Multirate/Symmetric Digital Subscriber Line (M/SDSL)
Standalone Termination Unit with G.703 interface and is intended for installers
and operators.
Section
Description
Chapter 1
About the Model 7976 Standalone Termination Unit.
Describes the Model 7976 Termination Unit's features and
capabilities.
Chapter 2
Using the Asynchronous Terminal Interface. Provides
instructions for accessing the user interface and navigating
through the screens.
Initial Startup and Configuration. Provides procedures for
Chapter 3
setting up the user interface and configuration steps.
Monitoring the Unit. Describes using the LEDs, status, and
Chapter 4
network statistics to monitor the unit.
Testing. Provides information about available tests and test
Chapter 5
setup.
Messages and Troubleshooting. Provides information on
Chapter 6
SNMP traps, device messages, and troubleshooting.
Security. Presents procedures for creating a login, setting
Chapter 7
the effective access levels, and controlling SNMP access.
IP Addressing. Provides information and examples
Chapter 8
regarding IP addresses.
August 1998
v