About This Guide - Paradyne Hotwire 7975 User Manual

About This Guide

Document Purpose and Intended Audience
Document Summary
7975-A2-GB20-40
This guide contains information needed to set up, configure, and operate the
Hotwire 7975 Multirate/Symmetric Digital Subscriber Line (M/SDSL) Standalone
Termination Unit and is intended for installers and operators.
Section Description
Chapter 1 About the 7975 Standalone Termination Unit. Describes the
7975 Termination Unit's features and capabilities.
Chapter 2 Using the Asynchronous Terminal Interface. Provides
instructions for accessing the user interface and navigating
through the screens.
Initial Startup and Configuration. Provides procedures for
Chapter 3
setting up the user interface and configuration steps.
Monitoring the Unit. Describes using the LEDs, status, and
Chapter 4
network statistics to monitor the unit.
Testing. Provides information about available tests and test
Chapter 5
setup.
Messages and Troubleshooting. Provides information on
Chapter 6
SNMP traps, device messages, and troubleshooting.
Security. Presents procedures for creating a login, setting
Chapter 7
the effective access levels, and controlling SNMP access.
IP Addressing. Provides information and examples
Chapter 8
regarding IP addresses.
December 1998
v