Paradyne HotWire 7976 User Manual page 118

Index
E
EER (Excessive Error Rate) , status message, 4-3
effective access level, 7-1
ending an ATI session, 2-8
enterprise, SNMP traps, B-3
environment requirements, D-1
error messages, line 24, 6-3
error statistics, 4-7
ESD precautions, 3-6
Excessive Error Rate (EER) Threshold, A-2, A-5
F
factory default configuration options, resetting, 7-4
factory defaults, 3-5
Failure, self-test result, 4-5
feature numbers, D-1
features, 1-2
firmware, download from server, 3-17
Front Panel LEDs, 1-4
G
G.703 Interface Impedance, A-7
G.703 Interface Options, A-4
G.703 Interface Option settings, A-4
G.703 Props, LEDs, 4-13
H
health and status messages, 4-3
I
identity, 3-4
Impedance, A-7
inactivity timeout, for Telnet session, A-10, A-12
Initial Startup and Configuration, 3-1
intended audience, v
Internal Switches, 3-6
Manual configuration, Internal Switches, 3-6
IP address, DSL peer, A-3
IP addresses, 8-1
IP addressing, example, 8-2
K
keyboard functions, 2-6
IN-2
L
lamp test, 5-8
LEDs, 4-12, 4-13
Line Coding Format, A-4
Line Framing , A-4
Link Up, LEDs, 4-13
link-layer protocols, 8-1
linkUp and linkDown traps, B-2
local line loopback (LLB), 5-3
LOF (Loss Of Frame), status message, 4-3
Login ID
access levels, 7-1
adding, 7-2
deleting, 7-4
login ID, 7-1
loopback, effect on LEDs, 4-13
LOS (Loss Of Signal), status message, 4-3
M
main menu, 2-2, A-1
Management and Communication Options, A-11
management port
access, 7-1
settings, 2-1
Margin Threshold, A-2
Memory Fail, status, 4-5
messages
alarm and device, 6-1
health and status, 4-3
line 24, 6-3
self-test results, 4-5
test status, 4-6
MIB, support, 1-5
monitoring, 4-1
N
navigating the screens, 2-6
Net Margin Threshold, status message, 4-3
network
interface options, A-2
tests, 5-2
G.703 Failed, self-test result, 4-5
network interface, pin assignments, C-2– C-6
network interface options, A-3
Network-Initiated DCLB, A-5
NMS, SNMP connectivity, 8-1
no test active status message, 4-6
August 1998 7976-A2-GB20-10