Test Status - Paradyne HotWire 7976 User Manual

Monitoring the Unit

Test Status

4-6
The Test Status messages in the following table appear in the right column of the
System and Test Status screen.
Table 4-3. Test Status Messages
Test Status Message Meaning
No Test Active No tests are currently running.
LLB Test Active, Pt 1 A network Line Loopback test is active on Port 1.
PLB Test Active, Pt 1 A Payload Loopback test is active on Port 1.
DLB Test Active, Pt 1 A Data Terminal Loopback test is active on Port 1.
RLB Test Active, Pt 1 A Repeater Loopback test is active on Port 1.
511 Test Active, Pt 1 A 511 Test and Monitor is active on the DSL Port 1 network
interface.
Lamp Test Active The Lamp Test is active, causing the LEDs on the front panel to
light.
For further information on testing, refer to Chapter 5,
August 1998
Testing .
7976-A2-GB20-10