Standards Compliance for
SNMP Traps
SNMP Traps
warmStart
authenticationFailure
7976-A2-GB20-10
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
warmStart
authenticationFailure
linkUp
linkDown
SNMP Trap
Description
warmStart
The unit has reinitialized
itself.
The trap is sent after the
unit resets and stabilizes.
There are no
variable-bindings.
SNMP Trap
Description
authenticationFailure
Failed attempts to access
the unit.
There are no
variable-bindings.
August 1998
B
Possible Cause
Reset command.
Power disruption.
Possible Cause
Three unsuccessful attempts
were made to enter a correct
login/password combination.
B-1