3401 Ribbon Drive Assembly
Removal
1.
Switch off the printer power.
2.
Remove the access cover (3051).
3.
Remove the ribbon cartridge (3405).
4.
Remove the print head cover.
5.
Remove the ribbon drive assembly mounting
screws. and
G.
6.
Unwind the ribbon drive cords from the drive
clutches; leave the springs attached to the side
frames.
7.
Remove the ribbon drive assembly
e.
3-76
SY34-0613
Reinstallation
1.
Reinstall the ribbon drive cords on the drive
clutches (3404, steps'3 and 4).
2.
Reinstall the ribbon drive assembly
e
with screws
" and
G;
do not tighten the screws.
3.
Push down on the ribbon drive at
8;
tighten
screw" and then tighten screw
G.
4.
Reinstall the print head cover.
5.
Reinstall the ribbon cartridge (3405).
6.
Reinstall the top cover (3052).