3403 Ribbon Drive Shaft
Removal
1.
Remove the ribbon drive assembly (3401).
2.
Remove the ribbon drive clutches (3402).
3.
Remove the retaining clip
e
from the top end of
the drive shaft.
4.
Remove the drive shaft
O.
Reinstallation
1.
Insert the drive shaft
0
into the ribbon drive
assembly.
2.
Reinstall the retaining clip
e.
3.
Reinstall the ribbon drive clutches (3402).
4.
Reinstall the ribbon drive assembly (3401).
3-78
SY34-0613