3151 Forms Tractor and Rear Document
Insertion Device (RDID)
Removal
Remove forms from the unit. Grasp both end covers
o
and pivot the unit toward the front of the printer
until the rear legs release; then
lift
straight up to clear
the cover.
Rear document insertion device
(for use with cut forms)
Reinstallation
Place the unit on top of the printer, and press on the
end covers
0
to seat the rear legs into the rear
openings. Then pivot the unit forward and press down
to seat the front legs on the platen shaft.
Note: When installing the forms tractor, ensure
that
the
gears
G
mesh
correctly,
the
paper-advance knobs turn, and the forms tractors
turn.
Maintenance Procedures
3-17