Table of Contents
Advertisement
Right Side-Frame
Removal
1.
Remove the forms tractor from the printer (3151).
2.
Remove the forms guide rack (3153).
3.
Remove the retaining clip
G)
from the idler gear
G;
pull the idler gear off the shaft.
4.
Loosen the two setscrews
G
on the collar;
remove the collar.
5.
Pull out the main shaft.
6.
Remove the support shaft screw
G.
7.
Remove the screw
G
from the tractor roller shaft.
8.
Pull the right side-frame
0
off the support shaft.
Reinstallation
1.
Push the right side-frame. on the support shaft.
2.
Reinstall the screw
G
on the support shaft.
3.
Reinstall the screw
G
on the tractor roller shaft.
4.
Reinstall the main shaft.
5.
Reinstall the collar
G
on the main shaft with the
two set screws; ensure that the tractor pins are
aligned.
6.
Push the idler gear
G
onto the shaft and install
the retaining clip
G).
7.
Reinstall the forms guide rack (3153).
8.
Reinstall the tractor (3151).
Maintenance Procedures
3-23
Advertisement
Table of Contents
