Table of Contents
Advertisement
3457 Fan
DANGER
Line voltage
is
present at the power switch terminals
anytime the ac power cable is connected.
Removal
1.
Switch off the printer power.
2.
Disconnect the ac power cable
G.
3.
Remove the top cover (3052).
4.
Separate the printer from the printer base (3053).
Note: On 50 Hz, 50/60-Hz printers, remove the
fan wires from TB2 " and omit steps 5 and 6.
5.
Remove the cover from the ac distribution box
(two screws)
O.
6.
Remove the fan wires from TBl-l and TBl-2
E).
7.
Remove the two fan
G
mounting screws.
3-96
SY34-0613
Reinstallation
1.
Reinstall the fan with the mounting screws
G.
Note: On 50 Hz, 50/60-Hz printers, remove the
fan wires from TB2" and omit steps 2 and 3.
2.
Connect the fan wires to TBl-l and TBl-2
E).
3.
Reinstall the ac distribution box cover (two
screws)
O.
4.
Assemble the printer to the printer base (3053).
5.
Reinstall the top cover (3052).
6.
Connect the ac power cable
G.
Advertisement
Table of Contents
