Oil Felt Lubrication
7.
Soak the felt with IBM No. 6 oil.
1.
Switch off the printer power.
8.
Install the plastic cover on the oil holder
e.
2.
Remove the access cover (3051).
9.
Install the print head cover.
3.
Remove the ribbon cartridge (3405).
10. Install the two print head cover screws • .
4.
Remove the two print head cover screws • .
11. Install the ribbon cartridge (3405).
5.
Remove the print head cover.
12. Install the access cover (3051).
6.
Remove the plastic cover from the oil holder
e.
Oil holder
5-4 SY34-0613