Macro Example - Key Tronic TRAK101 User Manual

Macro
Example
Macro Menu
..
Page 8·18
Next press Fl 2 and the letter "C" to perform the DOS
chkdsk command.
If you want to invoke the macro without having to press
the ''hot key'' (Fl2), select [Act] (Activate), from the
macro menu. Notice that when [Act] is selected, the On/
Off toggle located in the extreme right-hand comer of the
macro menu. changes to On. If you want to return to
{one-time-only} operation (default mode). select [Dact]
(Deactivate), from the macro menu. This changes the
On/Off toggle in the macro menu back to Off.
All Macro Menu Options are listed below. followed by a
brief description:
[Read]
[Save]
[Create]
[Erase]
[List]
Loads a macro into memory that has been
previously saved to disk.
Saves a newly created macro to disk.
Assigns a macro message or command to a
specific key or certain key combinations.
Deletes all existing macros from RAM
memory. Macros previously saved to disk.
are not deleted.
Shov.·s the macro assignments for individual
macros. Use the space bar
to
step through
the list.