Key Tronic TRAK101 User Manual page 43

Appendix
A
COMMAND LINE SWITCHES
The Command Line Switch Appendix provides a
detailed listing of all command line switches for making
changes to the trackball.
Trackball command line switches can be used to change
trackball settings that may include vertical and horizontal
sensitivity or to switch ports for example. Command line
options can be issued at any time from a DOS prompt.
Command line switches can start with either"/" or"-".
and the options can be in either upper or lower case.
In the following descriptions, option letters are shovm in
upper case. Use a number from 0 to 100 in place of <n>.
The default setting for each option is 50. For example.
if you want to increase both vertical and horizontal
sensitivity. at the DOS prompt. type:
TRAK/01 !S/00 <Return>
Larger values make the tracking faster - the I 00 entered
in the example makes a very fast trackball. Smaller
values make the tracking slower.
All trackball command line options must be entered with
the following format:
TRAKlOl /S<nnn> -
Number from 0 - 100
I
Trackball Option:
L
/S,/H./V,/D
Driver Name
Page A-1