Key Tronic TRAK101 User Manual page 44

Page A-2
A space must precede each "/" character in the command
line. You can issue as many options as needed from a
single command line.
/Sn Set sensitivity 0-100 (horizontal and vertical)
Default: SO
/Hn Set horizontal sensitivity only
Default: SO
Nn Set vertical sensitivity only
Default: SO
/OFF Remove mouse driver from memory if possible
/Mn Select ballistic profile 1-4
Default: 2 (Moderate)
/Cn Install serial driver on COM port n
(with PS/2 style addressing for COM 3 and 4)
/CnA Install serial driver on COM port n
(with PS/2 style addressing for COM 3 and
4)
11
Install serial driver on COM 1
12 Install serial driver on COM 2
13
Install serial driver on COM 3 (with PS/2 style
addressing)
14
Install serial driver on COM 4 (with PS/2 style
addressing)
/3A Install serial driver on AT-style COM 3
/4A Install serial driver on AT-style COM 4
/Z Install PS/2 driver for PS/2 mouse port
Note: Certain command line switches will be changed
in Version 8.xx for complete compatibility with
the Microsoft Version 8 driver.