Table of Contents
Advertisement
ADJUST Utility Program
Key Sequence: Alt - A
Using the Trackball
The ADJUST utility allows you to change the horizontal
and vertical sensitivity and trackball speed. ADJUST is a
terminate and stay resident (TSRl program.
ADJUST can be activated from any text based programs
running under DOS by pressing Alt -
A.
ADJUST works
only in text mode. It will not pop up on top of a graphics
application.
You may leave ADJUST without making any changes by
clickin
0
on Cancel or pressing the Esc key.
Trackball Sensitivity
Horizontal
0
10
Vertical
0
10
Speed Threshold
0
10
Change
Reset
Cancel
The scale boxes are marked 0 through l 0. This is
shorthand for 0 through 100. You may change sensitiv-
ity by as little as 5. since there are intermediate positions
in the scale boxes. 0 is the least sensitive and 100 is the
most sensitive.
Refer to the TRAKIOI Assist Program for additional
information on ADJUST.
Page 4-11
Advertisement
Table of Contents
