Key Tronic TRAK101 User Manual page 58

Using The Macro
lrtJIJ
Once the keyboard macro dri\'er is loaded into memory.
you can use the macro function from DOS or most of
your application programs. To display the macro menu.
hold down either SHIFT key and press F 12. The macro
menu is displayed at the bottom of your screen as shown
below.
Read macros from file
OPTIONS:
11;@11
[Save] [Create] [Erase] [List] [Act] [Dact] [Quit]
Off
Page B-14
Macro :Vlenu
You can cycle through the menu bar options by pressing
the spacebar or using the arrow keys on the cursor control
keypad. Notice that a brief description is given for each
menu option in the top line of the menu bar. When the
desired menu option is highlighted. press ENTER.
You can also select any menu option by typing the first
letter of the desired entry.
If you are in one of the sub-menus and wish to return to
the macro menu press ESCAPE.
You can remove the macro menu from your screen by one
of the following:
• Press ESCAPE
• Press .. Q .. for Quit
• Move to the Quit menu option and press
ENTER