Table of Contents
Advertisement
Page 4-10
Use a number from 0 - 100 in place of <nnn>. The
default setting for each option is 50. For example, if you
want to increase both vertical and horizontal sensitivity,
at the DOS prompt. type:
TRAKJOJ/SJOO
<Return>
Larger values make the tracking faster - the 100 entered
in the example makes a very fast trackball. Smaller
values make the tracking slower.
All trackball command line options must be entered with
the following format:
TRAKll\l /S<nnn> - - Number from 0 - 100
Mouse Option:
IS, IH, N, ID
-~----Driver
Name
A
~ace
must precede each "/" character in the command
line. You can issue as many options as needed from a
single command line. Trackball command line options
can also be used
to
switch ports or used to load the
trackball driver and specify the port as shown below:
TRAKlOl 11
TRAKlOl
/2
(Loads driver and selects COM port 1)
(Loads driver and selects COM port
2)
See Appendix B. Command Line Switches. for a com-
plete listing of all trackball command line switches.
Advertisement
Table of Contents
