Starting The Data Acquisition Software - Agilent Technologies 6475 User Manual

4 Basic Operation

Starting the Data Acquisition Software

Starting the Data Acquisition Software

The instructions below include the following assumptions:
• The hardware and software are installed.
• The instrument is configured. For information on configuring your instrument,
• The LC modules and the Triple Quad LC/MS are turned on, but the LC pump is
After installation, all of the Agilent MassHunter Workstation Software icons on
your desktop. To start the Data Acquisition program, double-click the Data
Acquisition icon on your desktop, or select Windows Start > Agilent MassHunter
LCMS Acq > Data Acquisition.The Data Acquisition window appears.
When Data Acquisition opens, the software engines automatically start. If you
NOTE
need to restart them, right-click the Acq System Launcher icon in the system tray,
and click Start Engines.
If you have recently changed LC modules, remember to configure the instrument
again. See the Installation Guide for instructions.
Agilent 6475 Triple Quad LC/MS System User Guide
refer to the MassHunter Control Panel online Help.
not running.
41