Table of Contents
Advertisement
4
Basic Operation
Switch LC stream to Waste
d Select the parameters of interest, and click
e Select any parameter in the Parameters to display list to remove from
f Customize the background color and the text color for any parameters in
g Set a conditional formatting range for the parameters that are numbers.
NOTE
h Click OK when finished selecting parameters.
NOTE
Agilent Triple Quadrupole LC/MS System User Guide
In the Available Parameters list, expand a device to see a list of the
instrument parameters for that device. Only configured devices will be
shown in the list.
the parameters to view.
display, and click
Remove.
the Parameters to display list.
If the value of the parameter is not within the limits entered, then the
background of the parameter is set to red.
The parameters selected appear in the Actuals window. The
customizations made will remain, even if the Mass Hunter Data Acquisition
software is closed and reopened.
Add. Repeat this step for all
72
Advertisement
Table of Contents
