Table of Contents
Advertisement
4
Basic Operation
Setting Up and Running a Worklist
8 In the Data File Settings section, click the caret to display fields to enter or
select the folders for the data files. Select the File Naming options.
9 For information on the Intelligent Reflex tab, refer to the online help.
10 Optional. On the Additional Parameters tab, enter a comment, and click OK.
11 To start the worklist, click
To use an acquisition method that has a different data analysis (DA) method
NOTE
than the method entered in the worklist, show the column called Override DA
Method in the worklist by using the Show/Hide/Order Columns dialog box. In
this column, browse for and select the method containing the DA parameters you
want to use for the sample. The DA part of this method is used instead of the DA
part of the current method.
Or, select this method in the Add Multiple Samples dialog box.
Agilent Triple Quadrupole LC/MS System User Guide
Run Worklist.
84
Advertisement
Table of Contents
