Agilent Technologies Triple Quadrupole LC/MS User Manual page 77

4 Basic Operation
Setting Up an Acquisition Method
d Optional. On the Quant tab, mark the Quant Automation check box. The
e Optional. Mark the Generate Report check box on the Quant tab. Then,
f Optional. For information on the Intelligent Reflex tab, refer to the online
6 Optional. On the Properties tab, set up the properties for this method.
7 Save the method.
a Click
b If the Audit Trail Settings in Control Panel are set to prompt for a reason
c If necessary, name the method and click OK.
79
name of the current Quantitative Analysis method is shown in the list. To
change the Quantitative Analysis method that is connected, click
Browse to select a different method. When the Acquisition method is
saved, the selected Quantitative Analysis method is copied or linked to the
Acquisition method.
select the Method Path/Template File to use. To print the report, mark the
Print to default printer check box. Mark the Publish check box to create a
CSV file, a TXT file, or a PDF file.
help.
Save or Save As.
when the method is saved, enter the Reason for creating a new version of
this method. Refer to the MassHunter Control Panel online help for more
information. Click OK.
Agilent Triple Quadrupole LC/MS System User Guide