6495D - Agilent Technologies Triple Quadrupole LC/MS User Manual

3 Tuning

6495D

6495D

A checktune can be run with the following ion sources: ESI, AJS ESI, MMI, and
APCI.
1 In the Method Editor window, click the TQ tab.
2 Click Tune > Checktune in the left pane.
This button locks control of the TQ instrument. When tune has control of the
TQ instrument, a single sample run or a worklist cannot be started and the
method editor is locked.
3 Click
4 Select an appropriate Instrument mode slider.
The polarity is chosen for this instrument using the
NOTE
(6495D only)"
5 Click
not selected within the timeout period, the system will go back to the method
setpoints.
a To stop the tune during operation, click
6 When the tune completes, review the report(s).
7 Click
45
Tune control.
on page 46.
Checktune. When clicked, tune setpoints are applied. If an action is
Tune control to release control of the TQ instrument.
Agilent Triple Quadrupole LC/MS System User Guide
functionality"Configure Tune